Variotherm Heating Systems - wall heating, wall cooling, floor heating, baseboards, ducted channel heating, created warmth, tiled stove, tepidaria, ceiling cooling

Wall Cooling

Highly individual technology which is easy to install. With System wall cooling for plaster construction and Modul wall cooling for dry construction.

The System-Wall Cooling for the plastered complition

System wall cooling does not just consist of "naked pipes" but forms a complete system in itself. This is based on the optimum integration of components (wall construction materials, piping, plaster) and can be operated by a heat pump, for example, which allows cold water to circulate. Variotherm's System wall cooling offers an excellent price/performance ratio and has been awarded the IBO-Quality seal (Austrian Institute of Healhy and Ecological building)!

     1    Base panel with VarioSchiene 16/100 rail
     1a Resilient Bar 16/100
     2    Attachment with impact anchors
     2a Attachment with nail fixing plugs
     3    Varioclimate-Pipe 16x2
     4    Eco-Heating Plaster
     5    Plastering Lattice 7x8 mm
     6    Eco-Heating Plaster (not included)

Modul wall cooling for dry construction

The ideal solution for wood-frame construction, pre-fabricated houses and loft conversions. It can be installed individually and quickly. Variotherm's Modul wall cooling is a fully flexible panel system: only 4 Modul panels meet almost all construction requirements. High-speed installation without a lot of dirt, because Modul wall cooling is a cooling system and a finished wall, all in one!

     1    Gypsum fibre panel 18 mm
     2    Variomodular Pipe 11,6x1,5mm
     3    Fixing screws
     4    Joint adhesive

Fire resistance test

The Variotherm panels for Modular-Wall Cooling have been tested for their fire-resistant properties by the city of Vienna research and testing institute.

Brochure to download (.pdf-document, 582 KB,

)

Sitemap | Find | Print this page

				1 Base panel with VarioSchiene 16/100 rail 1a Resilient Bar 16/100 2 Attachment with impact anchors 2a Attachment with nail fixing plugs 3 Varioclimate-Pipe 16x2 4 Eco-Heating Plaster 5 Plastering Lattice 7x8 mm 6 Eco-Heating Plaster (not included) Modul wall cooling for dry construction The ideal solution for wood-frame construction, pre-fabricated houses and loft conversions. It can be installed individually and quickly. Variotherm's Modul wall cooling is a fully flexible panel system: only 4 Modul panels meet almost all construction requirements. High-speed installation without a lot of dirt, because Modul wall cooling is a cooling system and a finished wall, all in one! 1 Gypsum fibre panel 18 mm 2 Variomodular Pipe 11,6x1,5mm 3 Fixing screws 4 Joint adhesive Fire resistance test The Variotherm panels for Modular-Wall Cooling have been tested for their fire-resistant properties by the city of Vienna research and testing institute. Brochure to download (.pdf-document, 582 KB, )











				You will need Adobe Acrobat Reader to open the pdf files. You can download it free of charge here.