Pump microstation

The distribution solution for small areas.

Are you looking for a heating circuit manifold solution for small areas, such as during a room renovation? 

The Pump Microstation is small, compact, and individually adjustable in temperature. This makes it the ideal solution for the expansion and renovation of individual rooms. Equipped with two heating circuits, it still offers sufficient flexibility for a variety of applications. Just like the Pumped VarioManifold, it was specifically developed to combine high-temperature heating systems with low-temperature surface heating systems.

  1. Flow Indicator Primary Circuit
  2. Regulating Valve
  3. High-Efficiency Circulation Pump
  4. KFE Cock, Rotatable
  5. Immersion Sleeve for Supply Sensor
  6. Thermometer
  7. Manual Air Vent
  8. Supply Valve, Adjustable with Flow Indicator
  9. Electrical Connection for Pump (3 × 0.5 mm², 230V AC, 50 Hz)
  10. Shut-Off port Valve (3/4" Internal Thread)
  11. Check Valve (only Pump Microstation)
  12. Variotherm Compression Fitting 3/4" Eurocone
  13. Shut-Off Valve, Thermoelectric Actuator Retrofit Possible
  14. Weather-Controlled Regulation Variant
  15. Fixed Value Regulation Variant
  16. Insulating Sleeve

1 Flow Indicator Primary Circuit

2 Control Valve

3 High-Efficiency Circulation Pump

4 KFE Cock, Rotatable

5 Immersion Sleeve for Flow Sensor

6 Thermometer

7 Manual Vent

8 Adjustable Flow Valve with Flow Indicator

9 Electrical Connection for Pump (3 × 0.5 mm², 230V AC, 50 Hz)

10 Shut-off port Valve (3/4" Internal Thread)

11 Check Valve (only Pump Microstation)

12 Variotherm Compression Fitting 3/4" Eurocone

13 Shut-off Valve, Thermoelectric Actuator Retrofit Possible

14 Weather-Controlled Regulation Variant

15 Fixed Value Regulation Variant

16 Insulating Sleeve

Overview of a Variotherm Pump Microstation with numbered components

Download brochure now

The pump microstation is not only ideal for renovations and small spaces, but also for combining with modern floor heating or wall heating. This makes it easy to retrofit pleasant radiant heat in existing buildings. 

Especially in smaller areas, such as bathrooms or living kitchens, the pump microstation provides an efficient solution without the need for a large distributor. This keeps the installation space-saving and flexible – with all the advantages of modern surface heating.

Find a specialist company